welcome to DLA transfers UK use code 20OFF for 20% off all UVDTF & DTF this excludes blanks min spend £15

Application Instructions

UVDTF Instructions

1. Peel design transfer off the backing.

2. Place the transfer on the cup ensuring design is straight and positioned correctly.
(The adhesive is very strong once the transfer touches the glass it’s impossible to take off)

3. Press the transfer down, working from the centre outwards, pushing out any bubbles.

4. Rub all over the design with your fingers or tool (squeegee) the more rubbing the better.

5. Peel clear film off and you’re done.

Hand wash only we do not advise to put in dishwasher or microwave do not soak your transfers in water.

We are not responsible for application mishaps.

*Please note: Not all brands of 16 oz. glass cups & 20oz straight tumblers have the exact same measurements. They can differ by a couple of millimetres. Our wraps have been measured to fit Libbey glass cans. Adjustments may be necessary*

DTF Instructions

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 160-180°C

Press transfer for 12-15 seconds temp of 160-180°C

Take item off your press and allow to cool

Cold peel the top sheet leaving your transfer on your item.

Second press for 5 seconds laying Teflon sheet on top of your transfer 160-180°C

*Please note the time and temp are suggested and you may have to adjust based on your own
press’s best settings. If transfer does not stick repress your item and allow to cool completely taking your item off your heat press you may have to increase your time and temp